Description for Osmo UV-Protection Oil 420:

*Osmo Oils only available to purchase with order of Timber For delivery purposes*

Brilliant for use with:

• Canadian Western Red Cedar
  
• British Western Red Cedar
• ThermoWood
  

Key Benefits:

1. Highly water and dirt resistant
   
2. Clear UV Protection Oil 420 Extra is furnished with active ingredients to protect the coating against mould, algae and fungal attack
3. Microporous, penetrating finish which does not crack, peel or flake
4. No sanding necessary when topping up coating
5. Delays natural greying by 12 times in comparison to untreated wood

METHOD OF APPLICATION:

With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well.
Allow to dry for approx. 12 hours. Cooler temperatures, higher humidity levels or over application will delay drying. Once dry, apply the second coat thinly.
When recoating colour treated surfaces, or for renovation works, one coat applied to the clean and dry surface is usually sufficient.

 CARE & Maintenance:

Regular Cleaning: Damp cleaning with Osmo Spray-Cleaner or diluted Osmo Decking Cleaner .

Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.

Recoating: Simply re-apply one thin coat onto the clean and dry surface when signs of wear become visible.

Description for Osmo UV-Protection Oil Tints Range:

*Osmo Oils only available to purchase with order of Timber For delivery purposes*

Brilliant for use with:

• Canadian Western Red Cedar
• Larch
• British Western Red Cedar
• ThermoWood
• Douglas Fir

Key Benefits:

1. Highly water and dirt resistant
2. Microporous, penetrating finish which does not crack, peel or flake
3. No sanding necessary when topping up coating
4. Delays natural greying by 12 times in comparison to untreated wood

METHOD OF APPLICATION:

With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well.
Allow to dry for approx. 12 hours. Cooler temperatures, higher humidity levels or over application will delay drying. Once dry, apply the second coat thinly.
When recoating colour treated surfaces, or for renovation works, one coat applied to the clean and dry surface is usually sufficient.

 CARE & Maintenance:

Regular Cleaning: Damp cleaning with Osmo Spray-Cleaner or diluted Osmo Decking Cleaner .

Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.

Recoating: Simply re-apply one thin coat onto the clean and dry surface when signs of wear become visible.